Adding a Basement Bathroom

This is what the laundry room looked like before the remodel. Courtesy of Family Handyman After photo This is the laundry room after the makeover. Courtesy of Family Handyman Your laundry room doesn’t have to be a dingy, disorganized place full of cobwebs and dust bunnies. In this article, we’ll show you the first steps for converting an unfinished laundry area into a finished room. We’ll focus on the most useful upgrade—replacing your old laundry tub with a new, tidy countertop and sink. It involves rerouting plumbing in the walls and installing new cabinets.

Utility Sink hook-up

How to navigate your way through the minefield that is plumbing code. Building code intro These snippets come from the IRC rules, but note that building codes vary in different local areas so you will need to do your own checking up on codes in your area. Also, this is just a few of the building codes that caught my eye and appeared relevant to my case.

It is not a full set, so you should consult a full code book to make sure you meet all the codes. It is very important to ensure your plumbing is implemented to code right from the start rather than wait for the inspector to tell you it’s wrong, because it is really hard to correct plumbing problems once everything is glued together. It is worth doing a complete CAD drawing of your entire house plumbing scheme showing every ABS fitting and have it checked by the Health Department inspector before you implement it.

There are three areas to plumbing normally addressed. One is the sewer fittings, hoses, and other dump Problems can be created when RVers use in-coach laundry machines. You just hook up the water service to it instead of the normal inlet location.

Emergency Plumbing Washing Machine Drain Plumbing a washing machine drain has always seemed easier to me as there is no fixture to install. No trip back after the counter-top is installed and the floor is done. The hardest thing to do is install an in wall box,[auto washer box], when it is called for. See my page, Washing Machine Pipes, for a suggestion. The rough-in for a washing machine drain can be quick and easy or arduous, simple in its concept or complex.

I have long contended that plumbing is rather like Legos with rules, lots of rules. Like legos there are many configurations possible, and the ability to see them is greater in some than in others. What I have noticed in my research for this page is that the majority of sites make shallow passes at this subject. They either suggest simple but illegal piping patterns or alterations to the existing inadequate arrangement that are little better than no change at all.

There are two concerns here, your health and your homes ability to pass a prospective buyers inspection when that time comes. How we got here I would like to begin by covering the need for the change. If you are planning to relocate the laundry room or install a washing machine drain where there was none go ahead to the next section now. Up until about most washing machines drained into laundry sinks, and most of those were concrete.

This was a satisfactory arrangement considering many folks at that time could remember why the front of laundry sinks are slanted.

Laundry Sink in the Garage

VirginiaLynne is a homeowner who likes to share her creative ideas for home renovation and home maintenance tips. Source When a Washing Machine Floods: Water all over the floor? Problems with your washing machine drain pipe?

UpCodes offers a consolidated resource of construction and building code grouped by jurisdiction.

Tweet If you’ve ever wanted a laundry sink but couldn’t come up with a way to drain it, you’re not alone. Most older homes have inadequate plumbing, especially when it comes to laundry drains. Often there’s only a trapped drain in the basement floor. And many basements , both old and new, have no below-floor drainage piping at all. These are common problems with no easy solutions.

Of course, the best approach is to break open the basement floor and install new drain and vent piping, but this is not always feasible. Another good alternative, especially when the sewer exits through a basement wall, is to break open a smaller section of flooring and install a below-grade sump pit and pump. Or, you could do what we did, which is install an above-floor sump box and pump, designed especially for laundry sinks. Equipment Overview Get up to 4 Free Quotes! Zip Code Project Get Started!

Our home is not that old, but we wanted a laundry sink on a wall opposite the existing plumbing stack.

Recommended subreddits

Print Installing a new bathroom with a toilet, sink, and tub is a challenging do-it-yourself project. You’ll need a thorough understanding of plumbing systems and techniques. Developing a sound plan and working with a good assistant will help ensure you get everything right. Check out all the individual tasks required in most bathroom installations, below. You’ll get a good grip on what you can do yourself, and when you may need to enlist some help.

Rated 5 out of 5 by yakpilot from Just got this SharkBite fitting to ease the work installing a new bathroom sink and faucet. Layin Just got this SharkBite fitting to ease the work installing a new bathroom sink and faucet. Laying on my back and fussing with compression fittings is not my idea of a good day., so these fittings are the answer.

Bathroom Plumbing System An expert overview of home plumbing systems, including water supply, drain-waste-vent, and more. If you have ever camped in the great outdoors, you have probably been reawakened to the joys of modern plumbing. By going without running water, a hot shower, or a flushing toilet, you can fully appreciate how important these are to daily life.

Because plumbing is complicated and one of the costliest systems to repair or install in a home, it pays to understand how the system works. Regarding planning for major plumbing work: A properly designed system will deliver water to the various faucets, fixtures, and water-using appliances efficiently and carry away waste water without clogs. Second, it may save you money.

By planning wisely, you can often reduce the overall plumbing expense significantly by locating bathrooms, kitchens, or laundry rooms near one another so that they can share parts of the system.

Plumbing question connecting water tanks to toilet and laundry?

How to Clear a Clogged Shower Drain: The vast majority of clogged shower drain problems can be solved by using some fairly simple and straightforward methods and tools. Once you have unclogged the shower drain, you should work on preventing or reducing the chances of it happening again—see my suggestions at the bottom of the page. Below are my eight suggested methods for how to clear a clogged shower drain.

Use baking soda and vinegar the natural alternative to chemicals!

They do, however, still need to be hooked up to a cold water source, but if you do not have traditional water connections in your home, never fear, you can hook these units up to your sink with the help of the optional Y-connector and Quick Connect Faucet Adapter.

Courtesy of Family Handyman Leaking Faucet If your outdoor faucet leaks around the handle when you turn it on, you either have a loose packing nut or a bad packing washer. First try tightening the nut with a wrench or pliers. The size and type of nut varies a bit with faucet styles. If the nut is tight but the leak persists, shut off the water to the faucet inside the house, remove the faucet handle from the outside faucet and unscrew the nut.

You should be able to pull off the old packing washer and take it to a hardware store to find an exact replacement. Older faucets may have a wad of string, called valve packing, instead of a packing washer. If so, pick up new packing graphite-coated string at the hardware store, unwind the old packing and wind on the new clockwise.

The packing nut should compress it tightly. You may have to wind on one layer, tighten the nut and then repeat the process to fill the space around the stem completely with packing string. Courtesy of Family Handyman Better Pipe Cutting It’s difficult to cut a thin metal pipe, such as a P-trap, with a hacksaw without squashing the pipe or mangling the cut. To make a nice cut, insert a section of wood closet rod or handrail into the end of the pipe to be cut.

Wrap one end of the rod with tape to fill out the rod to the pipe’s inner size. Clamp the wood in a vise and cut through both the pipe and the wood.

Utility Sink Cost

Drains Plumbing Whenever water comes into a home, it has to have a way to leave after it’s been used. This is where the importance of drains and proper drainage comes into play. Most homes utilize the same basic principles for plumbing and drain systems: A main water line usually comes in around the home’s foundation; from this point, it runs over to a water heater. The water heater generates hot water for the entire house.

From the water heater, hot and cold water lines run throughout the house, supplying each of the fixtures with water.

All homes have open floor plans, full basements and beautifully appointed kitchens and baths, along with two bedrooms and two bathrooms and laundry room.

Step 1 Remove the old laundry tub, by first cutting off the water supply. Next, remove the bottom drain pipe connection under the old basin. Step 2 Time to install the legs. Flip the sink basin upside-down to do this. Use a hammer and a piece of wood to knock the legs into place, if the pieces are too tight for each other. You may also wish to install screws to secure the unit to the floor, which adds stability to it.

If you install fasteners, make sure you use the right kind for the floor.

Moving washer and dryer hookups

Check Prices On Amazon Ejector pumps are used when a bathroom or laundry room fixture is located below the grade of the main sewer or the septic line. They allow for the flow of solids and liquid to work against gravity and be pumped from the basement up to different parts in the house like to a house sewer or sink. The sizing determines the cost of the package system and basin.

They all work on simple concepts. Wastewater and suspended solids flow to an ejector pit below the elevation of the main sewer that flows out to the city sewer. As the wastewater flows into the pit the water level rises and actuates a switch which cycles the pump.

Your local plumber, My Service Pro PLUMBER Inc. offers 24/7 emergency service to Lake Minnetonka and the surrounding areas. Call today!

Do you offer warranty What does a bathroom renovation cost? This can make a tired bathroom look new again. This is a good option to increase the resale value of a rental unit or if your bathroom structure is in great condition but you hate the colour of the tiles. This option will ultimately give you the best long term outcomes or is needed if you would like to change the layout of the bathroom. This allows you to make a grand statement, creating a stylish bathroom that will still look great in 30 years.

How long does a bathroom renovation take? Obviously it will vary depending on what is done, however you should allow 3 weeks for a full standard bathroom renovation from removal to being able to use it again. For a high end bathroom this can take up to 5 weeks as you may need to wait for items like a custom made vanity and other fixtures as well as the extra time needed in conducting the work. If you are simply looking at the re-surfacing or tile over tile options, allow a week.

Please note custom shower screens can take 2 weeks from measure to installation you can still use the shower or bath in this time but just need to be mindful of water splashing on other fixtures What is the process from quote to completion?

Pex Pipe Laundry Box Installation With Pex Pipe 👍👍👍